Quefrency Rev. 3

A 60%/65% split staggered keyboard, with 2x5 macro section option for the left half. Pronounced as keew-fren-see.

New! Rev. 3 PCBs: TRRS jacks for connecting both halves have been replaced with USB-C! This will allow for a slimmer build with shorter standoffs and less of a chance of shorting out PCBs while disconnecting halves from each other.

PCB Kits and Plate Kits are sold separately, so unless you are having your own case/plates made, you will need both types of kits.

Features:

• Option for rotary encoders at top left and top right corners
• ANSI/ISO support
• Options for split backspace and split right shift
• Layouts supported: KLE link
• Macro section on left half and right column on right half can optionally be broken off
• In-switch LED support (single-color 2-Pin LEDs)
• Separately controlled Caps Lock LED
• USB-C port
• Compatible with MX-style switches only
• QMK compatible, pre-flashed with VIA support
• Connection between halves:
• TRRS for Rev. 2
• USB-C for Rev. 3
•  

PCB Kits:

• Left PCB and Right PCB
• One size fits all - Left PCB can have macro section broken off, and the Right PCB can have the right column broken off for 60% mode instead of 65%
•  

Full Acrylic Case:

• See Quefrency Acrylic Case for a full acrylic case option
• FR4 plate kits listed here are not needed with the acrylic case
•  

Plate kits:

• These plates work for both Rev. 2 and Rev. 3 PCBs
• Comes in different variants to allow you to mix and match halves:
• Halves:
• Left half 60%
• Left half w/2x5 Macro section
• Right half 60%
• Right half 65%
• Full Plate Kits (Left & Right):
• Plate Kit 1: Left half w/Macro section + Right half 65%
• Plate Kit 2: Left half 60% + Right half 65%
• 1.6mm thick FR4
• M2 6mm screws and 10mm standoffs
• Somewhat works with Rev. 1 PCBs:
• Some standoff locations with Rev. 2 plates may interfere with reset switch
• Backspace issue for Rev. 1 usage with first batch of plates have been resolved with current batch (pictures have not been updated to show Rev. 1 compatible stabilizer cutouts)
•  

Other parts needed not included in these kits:

• MX-compatible switches
• TRRS Cable (for Rev. 2)
• USB-C to USB-C Cable (for Rev. 3)
• PCB-mount MX stabilizers - Most configurations will use 6 stabilizers
• USB-C cable
• 1.8mm or 2x3x4mm single-color LEDs
• Rotary Encoder and knobs
• 3D Printed High Profile Case from P3D
• 67 key switches
• Keycaps are not included (as pictured)